SENA Parani-SD200L - Manual (Page 8)

8
1.3. Product Specification
SD200L
Serial Interface One female DB9 serial port for data communication
Serial speeds 1200bps to 230400bps
Flow Control: None, Hardware (RTS/CTS)
Signals: Rx, Tx, RTS, CTS, DTR, DSR, GND, DCD
Bluetooth v1.2
*
Protocol: RFCOMM, L2CAP, SDP
Profile: Serial Port Profile
Class 2
Level: Max. 4dBm
Bluetooth Interface
Working distance:
Default–Default Antenna 30m
Default–Dipole Antenna 50m
Dipole– Dipole Antenna 80m
Patch– Dipole Antenna 150m
Patch– Patch Antenna 300m
Configuration ParaniWIN, Modem AT command set
Firmware Update ParaniUpdater
Diagnostic LED Power
Standby
Connect
Serial Rx/Tx
Supply voltage: 5V ~ 12V DC
Supply current
- minimum 150mA
Nominal power consumption
- 58mA@9600bps, 66mA@115Kbps
Power
Common Power supply options:
Power via a standard AC-plug DC-adapter
Power via USB power cable
Power via DC power cable
Power via pin 9 of DB9 connector
Built in Battery
Battery Usage Time When using built in battery - 190mAh
- Avg. 4hr@9600bps
Full charging time – Avg. 2hr
Environmental Operating temperature: -10 ~ 55
o
C
Storage temperature: -20 ~ 70
o
C
Humidity : 90% (Non-condensing)
Dimension
96 mm L (3.8 in.)
31 mm W (1.2 in.)
16 mm H (0.6 in.)
Physical properties
Weight
25 g
Approvals FCC(A)
Warranty 3-year limited warranty