SENA Parani-MSP1000 - Manual (Page 18)

18
Please refer to the following:
1) Attach the power adapter to the Parani-MSP1000. Do not attach the Ethernet cable on the
MSP1000 or the PC.
2) Search for the Parani-MSP1000 using Bluetooth Scan software and then connect to the
device using [Network Access Point] protocol.
3) Make sure the connection is made, and then check the IP address of the PC or laptop.
The Parani-MSP1000 has a built-in DHCP server, and it leases the 10.0.0.x IP address to the
client computer. The default IP address of the Parani-MSP1000 in this PAN is 10.0.0.1.
4) Try to connect to the Parani-MSP1000 by IP address, 10.0.0.1 using web or telnet program.
5) Users can configure the box using wireless connection.