SENA Parani-MSP1000 - Manual (Page 23)

23
After enabling the Dynamic DNS service in the Dynamic DNS Configuration menu, the user must enter
the registered Domain Name, User Name, and Password. After applying the configuration change,
users can access the Pro Series using only the Domain Name.
Figure 3-2 Dynamic DNS Configuration
3.3. SMTP Configuration
The Parani-MSP1000 can send an email notification when the number of system log messages
reaches to certain value The user must configure a valid SMTP server send these automatically
generated emails. The Parani-MSP1000 supports three SMTP server types:

SMTP without authentication

SMTP with authentication

POP-before-SMTP
These examples can be seen in Figure 3-3. Required parameters for each SMTP configuration
include:

SMTP server IP address

SMTP user name

SMTP user password

Device mail address
The device mail address specifies the sender’s email address for all log and alarm delivery emails.
SMTP servers often check only the sender’s host domain name of the email address for validity.
Consequently, the email address set for the device can use an arbitrary username with a registered
hostname (i.e. [email protected] or [email protected] ).
The SMTP user name and SMTP user password are required when either SMTP with authentication
or POP-before-SMTP mode is selected.