Appendix d. control commands, D.1. commands for control port – SENA Parani-MSP1000 User Manual
Page 78
Advertising
78
Appendix D. Control Commands
The Parani-MSP1000 is controllable by Control commands through 2525 TCP port. Every command
responds with +OK if successful, otherwise –ERR.
Figure D-1 Control command
D.1. Commands for Control port
<OPT> : Necessary, [OPT] : Optional
Synopsis
USER <username>
Description
To enter login name.
Example
USER admin
+OK Password required
Synopsis
PASS <password>
Description
To enter the password for logging in.
Example
PASS 1234
+OK User Authenticated
Advertising