SENA Parani-MSP1000 - Manual (Page 27)

27
4. Bluetooth Configuration
4.1. General properties
This menu describes configuration for the Bluetooth parameters of the Parani-MSP1000.
 Bluetooth friendly name
“%h” inserts the host name configured in the Host name configuration. “%d” inserts the device id.
 Discoverable (Inquiry scan)
When this is enabled, the Parani-MSP1000 is “discoverable.”
 Connectable (Page scan)
When this is enabled, the Parani-MSP1000 is “connectable to.”
 Authentication
When this is enabled, the Parani-MSP1000 requires pass key (PIN code) for incoming
connections. If the pass key is incorrect, the connection will be rejected.
 PIN code
This PIN code is applied for incoming and outgoing connections both.
 Encryption
When this is enabled, the Parani-MSP1000 applies encryption to all Bluetooth connections.
 Class of device
Specify the kind of device and type of available service on this device. The Class of device is
composed three bytes (0xSSDDdd): Major Service Class (SS), Major Device Class (DD), Minor
Device Class (dd).
Major Service Class:
Bit 1: Positioning (Location identification)
Bit 2: Networking (LAN, Ad hoc, …)
Bit 3: Rendering (Printing, Speaker, …)
Bit 4: Capturing (Scanner, Microphone, …)
Bit 5: Object Transfer (v-Inbox, v-Folder, …)
Bit 6: Audio (Speaker, Microphone, Headset service, …)
Bit 7: Telephony (Cordless telephony, Modem, Headset service, …)
Bit 8: Information (WEB-server, WAP-server, …)
Major Device Class:
0x00: Miscellaneous
0x01: Computer (desktop, notebook, PDA, organizer, …)
0x02: Phone (cellular, cordless, payphone, modem, …)
0x03: LAN / Network Access point
0x04: Audio / Video (headset, speaker, stereo, video display, vcr, …)