SENA Parani-MSP1000 - Manual (Page 37)

37
Figure 5-4 Service category - Network
5.5.4. Service category – Serial hub
In Serial hub mode, Parani-MSP1000 relays data communications between Bluetooth devices. With
Parani-SD only 1:1 cable replacement is possible, however, incorporating Parani-MSP1000 multiple
Parani-SDs can communicate each other, 1:N multi-serial with Parani_SD.
Note: The serial hub mode is supported only when the Pairing mode is “Custom”
Figure 5- 5 Service category – Serial hub
5.5.5. Frame buffer
The available options are as follows:
 Disable
The frame buffer functionality is disabled. The Parani-MSP1000 sends the data received from
SPP to remote hosts as soon as possible.
 Fixed size
The Parani-MSP1000 waits until the received data size is the configured fixed size.