Configuration management – SENA Parani-MSP1000 User Manual
Page 52
52
will allow the date and time information to be kept maintained by the internal battery backup.
The user may also need to set the timezone and the time offset from UTC depending on the users’
location. If the user uses daylight saving time, the user may also need to set the daylight saving time
properties such as; the daylight saving timezone, the time offset from UTC, start data and time, end
date and time.
7.5. Configuration management
The user may export the current configurations to a file at such locations as CF card, user space or
local machine and import the exported configurations as current configurations from CF card, user
space or local machine.
The users may restore the factory default settings at any time by selecting “Factory default” at the
location property or by pushing the hardware factory default reset switch on the back panel of the
Parani-MSP1000.
The following parameters should be properly set up in order to export / import configurations as
follows:
Configuration export
Location : Location to export to.
Encrypt : One of Yes or No.
File name
Configuration import
Location : Location to import from. By selecting Factory default, the user may restore the
factory settings.
Configuration selection : Determines what kinds of configurations are imported.
Encrypt : Yes or No.
File selection : List all the exported files satisfying the encrypting option at the selected location
which is one of CF card and user space.
Local : Helps to browse the exported file at local machine if location is local machine.
To export the current configurations:
1.
Select the location to export to.
2.
Select the encrypting option
3.
Type the file name.