SENA Parani-MSP1000 - Manual (Page 38)

38
 Timeout
The Parani-MSP1000 waits until the received data size is the configured fixed size or the timer is
expired. If the timeout is zero, it means unlimited.
 Delimiter
The Parani-MSP1000 waits until the configured delimiter is arrived, the received data size is the
configured fixed size or the timer is expired. If the timeout is zero, it means unlimited.
 STX + data + ETX
The Parani-MSP1000 waits until a frame composed of STX + data and ending in an ETX, the
received data size is the configured fixed size or the timer has expired. If the timeout is zero, it
means unlimited.
 STX + data + ETX + wildcard-characters
The Parani-MSP1000 waits until a frame composed of STX, data, ETX and some wildcard-
characters is arrived, the received data size is the configured fixed size or the timer is expired. If
the timeout is zero, it means unlimited.
Figure 5-6 Frame buffer configuration
5.5.6. Network service
The available options are as follows:
 Network service mode
The available modes are server, client, tunneling and vertex. If the server is selected, the Parani-
MSP1000 waits for an incoming connection. If the client is selected, the Parani-MSP1000 tries to
connect to the pre-defined remote host. The tunneling mode is a mixed mode of server and client.
The Parani-MSP1000 waits for incoming connection, but when there is data received from SPP
and the incoming connection is not established yet, the Parani-MSP1000 tries to connect to