SENA Parani-MSP1000 - Manual (Page 19)

19
3. Network Configuration
3.1. IP Configuration
3.1.1. Ethernet 0 (eth0) configuration
The Parani-MSP1000 requires a valid IP address to operate within the user’s network environment.
If the IP address is not readily available, contact the system administrator to obtain a valid IP address
for the Parani-MSP1000. Please note that the Parani-MSP1000 requires a unique IP address to
connect to the user’s network.
The users may choose one of two Internet protocols in setting up IP address: i.e.

Static IP

DHCP (Dynamic Host Configuration Protocol)
The Parani-MSP1000 is initially defaulted to STATIC mode, with a static IP address of 192.168.161.5.
Table 3-1 shows the configuration parameters for all two IP configurations. Figure 3-1 is an example of
what the actual web-based GUI display looks like.
Table 3-1 IP configuration Parameters
IP address
Subnet mask
Default gateway Static IP
Primary DNS/ Secondary DNS
DHCP Primary DNS/ Secondary DNS (Optional)
Figure 3-1 IP Configuration