SENA Parani-MSP1000 - Manual (Page 33)

33
4.5. Connections
The Bluetooth connections currently connected to the Parani-MSP1000 are displayed. Definitions and
descriptions of each parameter are described as follows:
 Inf
The Bluetooth interface
 BD address
The remote BD address
 Device name
The name of remote Bluetooth device
 LM
The Link mode of the Parani-MSP1000. The “M” means Master and the “S” means “Slave”
 RSSI & LQ
The RSSI and Link Quality (LQ) show the signal strength. The closer LQ is to 255 and RSSI is to
0, this means the Parani-MSP1000 has a good connection to the connected Bluetooth device. In
general, the wireless connectivity is at its best within 10 meters
Figure 4- 6 Bluetooth Connections