GE Industrial Solutions Control System Toolbox For an AV-300i Version 2 Drive - Manual (Page 32)

4-2 •••• Chapter 4 Configuring an AV-300i Version 2 Drive GEH-6412 Toolbox for AV-300i Version 2 Drive
Click on the tab,
Drives & Exciters.
Select AVDV Series Drive
and click OK.
The Choose the Pattern
and Version directory
dialog box displays.
Pattern and Version
Select a Version.
Click OK.
If the Enter - User ID
dialog box displays, then
enter an ID and click OK
(see the next section).
Otherwise, the Select Drive
Size dialog box displays.
Drive Size
Select a file that sets the
values for the particular
bridge size being configured.
Obtain this number from the
drive nameplate on the drive
being configured. Click OK.
The Toolbox Work Area for
the selected drive displays.