GE Industrial Solutions Control System Toolbox For an AV-300i Version 2 Drive - Manual (Page 65)

GEH-6412 Toolbox for AV-300i Version 2 Drive Chapter 4 Configuring an AV-300i Version 2 Drive •••• 4-35
Genius Configuration
This section describes how to insert the Horner Electric's Genius ™ Serial Bus
Interface (SBI) and set communication values. The Genius board configuration is
performed in conjunction with the drive configuration.
Ø To insert a Genius
Or click the right mouse
button and select Modify.
1. From the Outline View, click on the drive name.
2. From the Edit menu, select Modify. The Edit Device Properties dialog box
displays.
Click to display the
drop-down menu.
Select Genius.
3. Click OK. The Genius item displays at the bottom of the drive list in the
Outline View.
Ø To modify a Genius
Or click the right mouse
button and select Modify.
1. From the Outline View, click on Genius.
2. From the Edit menu, select Modify. The Modify – Genius Configuration
dialog box displays.
The Baud Rate of the Genius bus
must match the current setting of the
other Genius devices on the same
bus.
The amount of Global Data that is
transmitted continuously from the
drive on the Genius bus. The size is
fixed at 6 words of data.
The amount of Directed Data that is
received continuously by the drive
and on the Genius bus. The size is
fixed at 6 words of data.
Enter a note associated with the
Genius configuration.
The Comm Port is selected from the
Options menu. Select Settings and
the tab AVDV Series Drive.
This is the address of the Genius board. This address must
be unique from other devices on the same Genius bus.