Toolbox/drive communications, Modifying settings – GE Industrial Solutions Control System Toolbox For an AV-300i Version 2 Drive User Manual
Page 47
GEH-6412 Toolbox for AV-300i Version 2 Drive
Chapter 4 Configuring an AV-300i Version 2 Drive
••••
4-17
Toolbox/Drive Communications
For more information, refer
to the section, Connecting to
an AV-300i Version 2 Series
Drive.
The toolbox can communicate with the drive through an RS-232C to RS-485 serial
port connection. However, only one drive at a time can be selected to go online
(communicate), even if wired into a multi-drop configuration.
The serial port connection settings used by the toolbox can be defined and modified.
These settings are saved and used by the toolbox for every connection to a drive
whose drive configuration file is set to communicate serially.
Modifying Settings
Ш
Ш
Ш
Ш To modify the communications setting
1. From the Options menu, select Settings.
2. Click on the tab, AVDV Series Drive.
3. Modify the Serial Port Communications - Comm Port settings as desired
and click OK.
Click on the
drop-down list
and select the
communication
port.
Note Depending on the products installed, the number of tabs displayed in the
Settings dialog box may vary.