GE Industrial Solutions CPS2500D +-190V - Manual (Page 29)

CPS2500D +/-190V Downstream System
Issue 4 January 2008 Installation 5 - 1
5 Installation
CPS2500D Installation
Purpose CPS 2500D Shelf Installation
Precautions Observe ESD protection while installing circuit packs
Safety • Always consider personal safety.
• Make sure the system is properly grounded per the National Electrical
Code and local building codes.
• Remove all metal jewelry before beginning the installation.
Installation Tools • Wire cutters and strippers
• Heat shrink gun
• Torque wrench (0-240 inch-lb or 28 Nm)
• 5/16 inch (8mm) hex driver
• 10 mm hex driver
• 48 Volt test load
• Digital meter with an accuracy of +/- 0.02%
• Screw Drivers (flat-blade and Phillips)
• ESD wrist strap