GE Industrial Solutions Spectra II Series Plug-in and Feeder Busway with BlueCoat Epoxy Insulation System - Manual (Page 2)

ii
WARNINGS, CAUTIONS AND NOTES AS USED IN THIS PUBLICATION
WARNINGS
Warning notices are used in this publication to emphasize that hazardous voltages, currents, or other
conditions that could cause personal injury are present in this equipment or may be associated with its
use.
Warning notices are also used for situations in which inattention or lack of equipment knowledge could
cause either personal injury or damage to equipment.
CAUTIONS
Caution notices are used for situations in which equipment might be damaged if care is not taken.
NOTES
Notes call attention to information that is especially significant to understanding and operating the
equipment.
This document is based on information available at the time of its publication. While efforts have been
made to ensure accuracy, the information contained herein does not cover all details or variations in
hardware, nor does it provide for every possible contingency in connection with installation, operation,
and maintenance. Features may be described herein that are not present in all busway systems. GE
Consumer & Industrial assumes no obligation of notice to holders of this document with respect to
changes subsequently made.
GE Energy makes no representation or warranty, expressed, implied, or statutory, with respect to, and
assumes no responsibility for the accuracy, completeness, sufficiency, or usefulness of the information
contained herein. No warrantees of merchantability or fitness for purpose shall apply.
To request a busway installation video or to ask questions about your installation, contact the GE
factory at (731) 645-6121.
The following are trademarks of GE Company: Spectra Series™, Spectra RMS™, BlueCoat
® , Weathershield™, Joint-Guard™,
Spectra II™
© 2007 GE Company
All Rights Reserved