GE Industrial Solutions GE ZENITH SERIES MDU - Manual (Page 27)

System Monitoring
GE Z ENITH C ONTROLS
MDU Owner’s Manual
601 S HILOH R OAD January 2013
Plano, TX 75074 Page 27
4.1.4. Monitor Screens
1. Banner/Alarm Screen
The display will revert to the banner screen after some time. This screen shows the banner
and any alarms on the unit. The up and down arrow buttons will scroll through the alarms
on the screen designated by the “>” on the left side of the screen. Any alarms with “> to
clear” on the right side can be cleared by pressing the right arrow button when the alarm
is selected. There can be several pages of alarms, and scrolling down will take you to the
next page.
2. MDU Device Screen
Several different devices can be connected to the display. Pressing “Enter” on the banner
screen will take you to the first device. This is the main MDU device page showing analog
parameters. Pressing the “Enter” button will switch you to other devices (if available) and
then back to the Banner Screen. Other devices can include Branch Circuit Monitoring,
Temperature Monitoring, etc. The up and down arrow buttons are used to navigate
through the different pages.
.