GE Industrial Solutions GE ZENITH SERIES MDU - Manual (Page 50)

Spare Parts
GE Z ENITH C ONTROLS
MDU Owner’s Manual
601 S HILOH R OAD January 2013
P LANO , TX 75074 Page 50
11.0 Spare Parts
The following is the recommended spare parts requirements for GE’s standard Monitored Distribution Units.
GE recommends that (1) one complete spare parts kit be kept for every (5) units at one site.
Some MDU’s are manufactured to meet a special application and/or a special configuration. These units may
require that a customized spare parts kit be ordered. If you require a special spare part kit, please contact
GE’s Local Representative for assistance.
The parts contained in a spare parts kit are OEM parts and have been tested to assure reliability and
functionality. GE recommends that only OEM parts be replaced in its MDU’s. Failure to do so could result in
the unit’s warranty being voided.
All parts should be replaced by a GE factory authorized engineer only. Some parts may require special
calibration and/or installation procedures.
It is recommended that spare parts kits be stored in a properly controlled storage area that is easily
accessible with 24 hour access in case of emergency requirements.
The following are details for available Kit Options for your MDU.
For pricing and availability of spare parts kits please contact GE's Local Representative.