GE Industrial Solutions GE ZENITH SERIES MDU - Manual (Page 35)

Branch Circuit Monitoring System (BCMS)
GE Z ENITH C ONTROLS
MDU Owner’s Manual
601 S HILOH R OAD January 2013
Plano, TX 75074 Page 35
5.2. BCMS Local Monitoring via GE Zenith Series MDU Monitor
5.2.1. BCMS Device Setup
Prior to this setup, ensure that all devices have been connected to the monitor via ModBus.
Each BCMS device being added the monitor needs to be assigned a unique ModBus
address. The MDU device is typically assigned address “1”, while subsequent devices are
assigned “2…, 3”, etc.
Device List:
To add a BCMS device, navigate to the main monitor setup screen as described on page
28. While on the main monitor setup, position the cursor “>” on “DEVICES” (using the up or
down keys) and press “ENTER”. This will take the user to the Device List illustrated on this
page. Based on detected connections, the GE Zenith Series Monitor automatically
generates this list.
Device Settings:
Position the cursor on the desired device in the list and
Press “ENTER” to modify settings for that particular device on the next screen (illustrated in
bottom-right section of this page). Once settings are configured, return to the Banner
Screen described on page 27 by pressing “ESC”.