Replacement procedures, Installing or replacing a rectifier – GE Industrial Solutions GPS 4848_100 Users Guide (single rectifier shelf) User Manual
Page 67
Advertising
Galaxy Power System 4848/100 with 595 Series Rectifiers S1:3 and later
Issue 10 February 2008
Maintenance and Replacement 11 - 3
Replacement Procedures
Installing or
Replacing a
Rectifier
Stop!
Be sure rectifier is set to STBY and ac breakers on
cabinet are OFF!
Installing or Replacing a Rectifier
Step
Action
1
Unpack the rectifier from shipping container.
Caution
Rectifier is heavy (59 pounds). Use two people to lift and
move rectifiers.
2
Remove rectifier by lifting the unit in a vertical direction
from the packing container. See figure below.
Caution
Do not rest rectifier on faceplate or rear chassis; damage
to faceplate and/or rear busbars will occur, rendering
the unit unusable.
Lift Straight Up
Continued on next page.
Advertising