3 loading a configuration – Xylem ProLab 3000 User Manual
Page 169
Advertising
ProLab 3000
Configurations
169
ba75645e03
12/2012
13.3
Loading a configuration
All users who can create a configuration can also load it.
When loading a configuration, all settings stored in the configuration file
can be loaded.
1
Open the File menu with Select configuration....
The Open file dialog box pops up.
2
Select a configuration file ("*.ste") and confirm with [OK].
The Configuration window pops up.
3
The configuration for all measured parameters can be viewed
but not changed.
4
If required, output the settings to the interface with [Print].
5
Load the configuration with [OK].
The settings stored in the configuration are active.
6
Close the Configuration window with [Terminate].
Advertising