Extron Electronics CrossPoint 300 Series - Manual (Page 100)

Reference Information, cont’d
CrossPoint 300 Matrix Switchers • Reference Information A-6
BNC-4 Mini HR Cable Part #
BNC-4 Mini HR bulk, 500' 22-032-02
BNC-4 Mini HR bulk, 1000' 22-032-03
BNC-5 Mini HR Cable Part #
BNC-5 Mini HR bulk, 500' 22-020-02
BNC-5 Mini HR bulk, 1000' 22-020-03
Plenum BNC-5 Mini HR Cable Part #
Plenum BNC-5 Mini HR bulk, 500' 22-103-02
Plenum BNC-5 Mini HR bulk, 1000' 22-103-03
Assorted connectors
BNC connectors Part #
BNC Mini HR crimp connectors, qty. 50 100-074-51
SHRmale crimp connectors, qty. 50 100-075-51
BNC bulkhead connectors, qty. 50
(for custom wall plates) 100-076-51
Pre-cut cables
BNC-4 Mini HR cable is used for RGBS cable runs, and BNC-5 Mini HR cable is
used for RGBHV cable runs. Either type can also be used for composite video,
S-video, or RGsB. All Extron BNC cables have male connectors on both ends. A
plenum version of the BNC-5 Mini HR cable is also available.
BNC-4 Mini HR Cable Part #
BNC-4-25' MHR (25 feet/7.5 meters) 26-210-04
BNC-4-50' MHR (50 feet/15.0 meters) 26-210-05
BNC-4-75' MHR (75 feet/23.0 meters) 26-210-06
BNC-4-100' MHR (100 feet/30.0 meters) 26-210-07
BNC-4-150' MHR (150 feet/45.0 meters) 26-210-08
BNC-4-200' MHR (200 feet/60.0 meters) 26-210-09
BNC-4-250' MHR (250 feet/75.0 meters) 26-210-54
BNC-4-300' MHR (300 feet/90.0 meters) 26-210-53
BNC-5-25' MHR (25 feet/7.5 meters) 26-260-03
BNC-5 Mini HR Cable Part #
BNC-5-50' MHR (50 feet/15.0 meters) 26-260-04
BNC-5-75' MHR (75 feet/23.0 meters) 26-260-16
BNC-5-100' MHR (100 feet/30.0 meters) 26-260-05
BNC-5-150' MHR (150 feet/45.0 meters) 26-260-12
BNC-5-200' MHR (200 feet/60.0 meters) 26-260-06
BNC-5-250' MHR (250 feet/75.0 meters) 26-260-18
BNC-5-300' MHR (300 feet/90.0 meters) 26-260-14
Bulk cable in lengths up to 5000' (1524 meter) rolls is available with or
without connectors.
Button Labels
Figure A-1 provides 16-button strips of blank button labels. Feel free to photocopy
them or cut them out of the manual, write button information in each button area
as desired, and put them in the switcher’s label window. For 8-button strips and
12-button strips, use scissors to trim the blank to the appropriate length.