Extron Electronics CrossPoint 300 Series - Manual (Page 96)

Reference Information, cont’d
CrossPoint 300 Matrix Switchers • Reference Information A-2
Reference Information
Specifications
Video
Routing
84 Series ................................ 8 x 4 matrix
88 Series ................................ 8 x 8 matrix
816 Series .............................. 8 x 16 matrix
124 Series .............................. 12 x 4 matrix
128 Series .............................. 12 x 8 matrix
1212 Series ............................ 12 x 12 matrix
168 Series .............................. 16 x 8 matrix
1616 Series ............................ 16 x 16 matrix
Gain ............................................... Unity
Bandwidth .................................... 300 MHz (-3 dB), fully loaded
0 - 10 MHz ................. no more than +0.1 dB to -0.1 dB
0 - 130 MHz ............... no more than +0.8 dB to -0.8 dB
Crosstalk ....................................... -80 dB @ 1 MHz, -55 dB @ 10 MHz, -45 dB @ 30 MHz, -37 dB @ 100 MHz
Switching speed ........................... 200 ns (max.)
Video input
Number/signal type ................... 8, 12, or 16 RGBHV, RGBS, RGsB, RsGsBs, HDTV, component video,
S-video, composite video
Connectors
84/88/816 Series ................. 8 x 5 BNC female
124/128/1212 Series ........... 12 x 5 BNC female
168/1616 Series ................... 16 x 5 BNC female
Nominal level ............................... 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
Minimum/maximum levels ...... Analog: 0.5 V to 2.0 Vp-p with no offset
Horizontal frequency .................. 15 kHz to 150 kHz
Vertical frequency ....................... 30 Hz to 150 Hz
Impedance .................................... 75 ohms
Return loss .................................... <-30 dB @ 5 MHz
DC offset (max. allowable) ......... 1.5 V
Video output
Number/signal type ................... 4, 8, 12, or 16 RGBHV, RGBS, RGsB, RsGsBs, HDTV, component video,
S-video, composite video
Connectors
84/124 Series ....................... 4 x 5 BNC female
88/128/168 Series ............... 8 x 5 BNC female
1212 Series ............................ 12 x 5 BNC female
816/1616 Series ................... 16 x 5 BNC female
Nominal level ............................... 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
Minimum/maximum levels ...... 0 V to 2.0 Vp-p (follows input)
Impedance .................................... 75 ohms
Return loss .................................... <-30 dB @ 5 MHz
DC offset ....................................... ±10 mV with input at 0 offset