Extron Electronics CrossPoint 300 Series - Manual (Page 36)

Operation, cont’d
CrossPoint 300 Matrix Switchers • Operation 3-12
1 2 3 4 5
OUTPUTS
6 ENTER PRESET
Press and release the Output 1 button.
The LED blinks to indicate that the selected
RGBHV input will be tied to this output. The Enter LED blinks to indicate
the need to confirm the change.
Figure 3-13 — Select the output
5 . Press and release the Enter button (figure 3-14).
ENTER
The Enter LED and all input LEDs and
output LEDs return to the unlit state.
Press the Enter button to confirm
the configuration change.
Figure 3-14 — Press the Enter button
The current configuration (figure 3-15) is now:
• Input 5 video tied to output 1, output 3, output 4, and output 8
• Input 5 audio tied to output 3, output 4, and output 8
Input 5 video tied
to outputs 1, 3, 4, and 8.
Input 5 audio tied
to outputs 3, 4, and 8.
Input
Output
1
3
4
8
5
Video
Audio
Figure 3-15 — Example 2, final configuration
Example 3: Removing a tie from a set of video and audio ties
The following steps show an example in which an existing audio tie is removed
from the current configuration. The steps show the front panel indications that
result from your action.