Extron Electronics CrossPoint 300 Series User Manual
Page 41
3-17
CrossPoint 300 Matrix Switchers • Operation
5
.
Press and release the RGBHV button to deselect RGBHV (figure 3-25).
RGBHV AUDIO
I/O
2
3
4
5
OUTPUTS
6
7
8
The output buttons for outputs that are not tied to Input 5 are unlit.
The output buttons for outputs that are tied to Input 5 light to
indicate audio ties (audio breakaway).
The Audio LED
remains lit to indicate
that only audio is
selected.
Press the RGBHV
button to delesect it.
The LED is unlit
when deselected.
Figure 3-25 — Deselect RGBHV to view audio ties only
6
.
Press and release the RGBHV button and the Audio button to toggle the
RGBHV LED lit and the Audio LED unlit (figure 3-26).
VIDEO AUDIO
I/O
2
3
1
4
5
OUTPUTS
6
7
8
The output buttons for outputs that are not tied to input 5 are unlit.
The output buttons for outputs that are tied to input 5 light to indicate video ties
(audio breakaway).
Press the Audio button
to deselect it.
The LED is unlit when
deselected.
Press the RGBHV
button to select it.
The LED lights
when selected.
Figure 3-26 — Deselect audio and select RGBHV to view RGBHV only
If video ties are established for input 5, the output LEDs for all video outputs
tied to input 5 light. If no ties are established for input 5, all output LEDs
return to the unlit state.
7
.
Press and release the View button to exit View-only mode (figure 3-27).
RESET VIEW
CONTROL
Press the View button
to exit View-only mode.
The View LED returns to the unlit state.
All input LEDs and output LEDs
return to the unlit state.
Figure 3-27 — Press the View button to exit View-only mode