Extron Electronics CrossPoint 300 Series - Manual (Page 37)

3-13 CrossPoint 300 Matrix Switchers • Operation
This example assumes that you have performed example 1 and example 2.
1 . Press and release the Esc button (figure 3-16).
ENTER PRESET VIEW ESC
CONTROL
Press the Esc button to clear all selections.
The LED
blinks once.
Figure 3-16 — Clear all selections
2 . To select audio only for the tie, if necessary, press and release the RGBHV
button and/or Audio button (figure 3-17).
RGBHV AUDIO
I/O
Press the RGBHV button to toggle on and off.
The LED is unlit when deselected.
Press the Audio button to toggle on and off.
The LED lights when selected.
Figure 3-17 — Select audio only
3 . Press and release the input 5 button (figure 3-18).
2 3 4 5 6
INPUTS
7
1 2 3 4 5
OUTPUTS
6 7 8
Press and release the Input 5 button.
The LED lights.
The Output 3, Output 4, and Output 8 LEDs light to indicate
the audio ties created in example 1.
The output 1 LED does not light to indicate the tie created
in example 2 because that tie is RGBHV only.
Figure 3-18 — Select an input
4 . Press and release the output 4 button (figure 3-19).