Extron Electronics CrossPoint 300 Series - Manual (Page 77)

4-7 CrossPoint 300 Matrix Switchers • Programmer’s Guide
Command/response table for SIS commands
Command ASCII Command Response Additional description
(host to switcher) (switcher to host)
Create ties
• Commands can be made back-to-back in a string, with no spaces.
For example: 1*1!02*02&003*003%4*16$.
• The quick multiple tie and tie input to all output commands activate all ties
simultaneously.
• The matrix switchers support 1-, 2-, and 3-digit numeric entries (1*1, 02*02, or 001*001).
Tie input X2 to output X3 , video (V) X2 * X3 ! Out X3 •In X2 •All Tie input X2 ’s video and audio
and audio (A) to output X3 .
Example: 1*3! Out03•In01•All Tie input 1 V & A to output 3.
Tie input X2 to output X3 , RGBHV only X2 * X3 & Out X3 •In X2 RGB Audio breakaway.
Example (see Note): 10*4& Out04•In10•RGB Tie input 10 RGB to output 4.
Tie input X2 to output X3 , video only X2 * X3 % Out X3 •In X2 •Vid Audio breakaway.
Example (see Note): 7*5% Out05•In07•Vid Tie input 7 video to output 5.
The & tie command for RGB and the % tie command for video can be used interchangeably on
all matrix switcher video models.
Tie input X2 to output X3 , audio only X2 * X3 $ Out X3 •In X2 •Aud Audio breakaway.
Example: 12*14$ Out14•In12•Aud Tie input 12 audio to output 14.
Quick multiple tie Esc +Q X2 * X3 !… X2 * X3 !
Qik
Example: Esc +Q3*4!3*5%3*6$ Qik Tie input 3 video and audio to
output 4, tie input 3 video to
output 5, and tie input 3 audio to
output 6.
Tie input to all outputs, V & A X2 *! In X2 •All
Example: 5*! In05•All Tie input 5 video and audio to all
outputs.
Tie input to all outputs, RGBHV only X2 *& In X2 •RGB
Example (see Note): 08*& In08•RGB Tie input 8 RGB to all outputs.
Tie input to all outputs, video only X2 *% In X2 •Vid
Example (see Note) : 14*% In14•Vid Tie input 14 video to all outputs.
The & tie all command for RGB and the % tie all command for video can be used
interchangeably on all matrix switcher video models.
Tie input to all outputs, audio only X2 *$ In X2 •Aud
Example: 1*$ In01•Aud Tie input 1 audio to all outputs.
Read ties
Read RGBHV output tie X3 & X2 RGBHV input X2 tied to output
X3 .
Read video output tie X3 % X2 Video input X2 tied to output X3 .
The & read tie command for RGB and the % read tie command for video can be used
interchangeably on all matrix switcher video models.
Read audio output tie X3 $ X2 Audio input X2 tied to output X3 .
Video mute commands
RGB/video mute X3 *1B Vmt X3 *1 Mute output X3 RGB (video off).
RGB/video unmute X3 *0B Vmt X3 *0 Unmute output X3 RGB (video
on).
Read RGB/video mute X3 B X4 1= mute on, 0 = mute off.
Global RGB/video mute 1*B Vmt1 Mute all RGB outputs.
Global RGB/video unmute 0*B Vmt0 Unmute all RGB outputs.