Extron Electronics CrossPoint 300 Series - Manual (Page 38)

Operation, cont’d
CrossPoint 300 Matrix Switchers • Operation 3-14
ENTER PRESET 1 2 3 4 5
OUTPUTS
6
Press and release the Output 4 button.
The LED blinks to indicate that the selected
RGBHV output will be untied.
The Enter LED blinks to indicate
the need to confirm the change.
Figure 3-19 — Deselect the output
5 . Press and release the Enter button (figure 3-20).
ENTER
The Enter LED and all input LEDs and
output LEDs return to the unlit state.
Press the Enter button to confirm
the configuration change.
Figure 3-20 — Press the Enter button
The current configuration (figure 3-21) is now:
• Video —
(HV switcher) — Input 5 tied to output 1, output 3, output 4, and
output 8
(HVA switcher)
— Input 5 video tied to output 1, output 3, output 4, and
output 8
• Audio — (HVA switcher) Input 5 audio tied to output 3 and output 8
Input 5 video tied
to outputs 1, 3, 4, and 8.
Input 5 audio tied
to outputs 3 and 8.
Input
Output
1
3
4
8
5
Video
Audio
Figure 3-21 — Example 3, final configuration (HVA switcher)