CEMB USA N300 - Manual (Page 13)

General overview 2 - 1
Chapter 2
General overview
Keypad
The keyboard on the CEMB N300 instrument has a limited number of keys, enough to
guarantee easy and intuitive use.
- on/off key
Press this key to turn the instrument on; hold it down for at least 3 seconds to turn
it off, then release the key.
Note:
After pressing , the instrument’s serial number and the version of the firmware
installed will be displayed briefly in the lower part of the screen. In the event of any
problems, take note of this data before contacting CEMB customer service to
enable us to provide you with a better service.
- OK key
In the main screen it confirms the selection made and opens the corresponding
page.
In the Setup screen it confirms the value of the parameter selected.
In the Vibrometer and Balancing screens it performs different functions:
-
it confirms values when setting acquisition parameters
-
it stops or starts the measuring process (see 2-3 Start/stop acquisition
function).
- when the additional functions bar is visible it is used to select the desired
function
In the records screen it opens the desired function from the additional functions
bar.