CEMB USA N300 - Manual (Page 78)

E - 4
List of symbols used for the instrument
Specific symbols used for data loaded from the records
vibration measurement records
balancing records
display the measurement saved in position 3 of the records
overall vibration value
amplitude of the vibration’s highest component
frequency of the vibration’s highest component
unbalance of the rotating body
initial unbalance of the rotating body (first calibration spin) and residual
unbalance (end of balancing)
Operator messages
press OK to start the measurement
press OK to confirm data overwriting or any other key to quit
press OK to confirm the previously selected operation or any other key to
quit
measurement in progress: await completion
measurement process active: press OK to stop it when you wish to accept the
result
connection to PC active: start the CEMB N-Pro software to transfer the data
Battery status
battery fully charged
battery partly charged
battery almost flat
battery flat: recharge within 5 minutes