CEMB USA N300 - Manual (Page 8)

1 - 2 General description
Optional accessories:
-
diameter 40 velocity transducer complete with connection cable, magnetic base
and probe
-
optic fibre photocell (60,000 RPM) complete with upright and magnetic base
-
10m-long extension cable for transducers
-
10m-long extension cable for standard photocell
-
1 USB data cable
-
CEMB N-Pro software for saving, managing and printing data.
Inputs
1 2 3 4 5 6
1 – channel A sensor input
2 – channel B sensor input
3 – photocell input for velocity measurement
4 – type B mini USB port for connection to PC
5 – instrument reset button
6
– battery charger connector
The sensors and photocell can be connected by simply inserting the connector into the
relative socket, pushing it in until a "click" is heard; make sure that the safety connection is
aligned correctly, as shown in the illustration.