CEMB USA N300 - Manual (Page 19)

Initial screen 3 - 1
Chapter 3
Initial screen (menu)
When turned on, the Instrument model N300 displays the main screen
containing the CEMB symbol, the instrument’s name, the battery status, the date and time
and the icons used to access the various pages:
– Vibration measurement
– Balancing
– General settings (setup)
After selecting the desired page using the and arrows, press to open it.
1. Vibrometer
-
measurement of the total vibration value (Overall), together with the amplitude and
frequency of the highest component (main peak value)
-
measurement of the vibration modulus and phase at the synchronous frequency at
the velocity of the rotating body or its multiples (1xRPM, 2xRPM, 3xRPM, 4xRPM
and 5xRPM)
2. Balancing
- field balancing of rotating bodies with one or two correction planes
3. Setup
- setting of the degree of sensitivity of sensors connected to the instrument
-
setting the instrument’s general operating parameters