CEMB USA N300 - Manual (Page 45)

CEMB N-Pro program (optional) 7 - 1
Chapter 7
CEMB N-Pro program (optional)
Data saved in the N100 and N300 instruments can easily be imported into a PC, organised
and saved to the hard disk and subsequently analysed, compared, printed, etc.
These operations are made possible thanks to CEMB N-Pro software (Professional
Environment for N-Instruments), available for Microsoft Windows operating systems.
The interface has been carefully designed to make it intuitive and therefore extremely
simple to use even for inexperienced users.
Note
This chapter refers to the "N instrument" or "N apparatus", generic expressions
that refer exclusively to the N100 and N300 models with which CEMB N-Pro
software can be used (communication, data organisation, printing, etc). The CEMB
N-Pro software cannot be used with other CEMB instruments, including those
from the N range.
System requirements
Installation and use of the CEMB N-Pro program requires:
- a processor: at least Intel Pentium IV 1GHz, or Athlon equivalent;
- memory: 512MB (recommended: 1GB or more);
- space on disk: at least 400MB free before installation (excluding space subsequently
required for the data records);
-
operating system:
-
Microsoft Windows 2000 at least Service Pack 4
-
Microsoft Windows XP at least Service Pack 2
-
Microsoft Windows Vista
-
Microsoft Windows 7
-
video resolution 1024x768 or better.
Installation of the software
Installation of the CEMB N-Pro software must be carried out by launching the setup.exe
program, contained in the CD-ROM, and then clicking on the key without
changing any options.
That way the software will be installed in the program directory.
Warning:
During installation of the software a file will be created containing the drivers for
USB communication: it is therefore important that the CEMB N-Pro software is
installed before the N100 or N300 instrument is connected to the PC, otherwise
malfunctioning may occur.