CEMB USA N300 - Manual (Page 51)

CEMB N-Pro program (optional) 7 - 7
- connect the N instrument to the PC and wait for a few seconds
- click on the drop-down menu again and select Refresh
-
the port that the instrument has been connected to is the one added to the list
noted down previously
Warning:
Always connect the N instrument to the same USB port on the PC. Otherwise it
will be necessary to change the COM port number in the General Settings window,
and in some cases even repeat the USB driver installation procedure.
- the language for messages
which can be chosen from a drop-down menu
-
Italiano
-
English
-
Français
- Deutsch
-
Español
-
the path of the basic folder (DB_N-Pro) of the PC’s data records
within which the program creates subfolders
-
vibr for vibration measurements
- bal for balancing data
After setting the desired values, press .
To quit the window without setting anything, press .
Reading data from the N100 or N300 instrument
After connecting the N instrument to the PC, checking and if necessary changing the USB
port setting, the CEMB N-Pro software can be used to automatically read all of the
measurements contained in the instrument’s records, by simply pressing .
After which, without pressing any key, wait for the message to appear marking the end of
this procedure. Data reading progress is indicated by the progressive filling up of a
horizontal bar. This procedure creates a folder in both records (vibration and balancing)
named according to the current date and time in the AAMMGG_hhmmss format where:
-
AA = last two figures of the year
-
MM = month of the year (01 January; 02 February; … 12 December)
-
GG = day of the month
-
hh = hour of the day (00 … 23)
-
mm = minutes (00 … 59)
-
ss = seconds (00 … 59)
In this way measurements will automatically be displayed in the order in which they were
imported.
Users with special or advanced requirements can name the folder as desired, or copy or
move all or part of its contents.