CEMB USA N300 - Manual (Page 29)

Vibrometer function 5 - 5
Measurement results
On the Vibrometer page the measurement results are displayed on the screen, successfully
combining the need for clarity and complete information.
Overall measurement:
1. channel that the measurement displayed refers to
2. status of the channel displayed:
= enabled
= disabled
3. sensor connected to the channel
4. measurement taken (Overall)
5. number of averages
6. frequency band
7. vibration value, with unit and type
8. amplitude and frequency of the vibration’s highest component. The more
components the vibration is composed of, the more the overall measurement will be
greater than the amplitude of the dominating component. If the two values are very
similar, the vibration takes on an almost sinusoidal form.
The measurement can be started and stopped by pressing .
Note:
Values obtained this way can be used to assess the state of operation of the
instrument, using, for example, the tables and diagrams present in Appendix B of
this manual.
1
6
2 3 4
5
7
8