Burkert Type 8696 - Manual (Page 47)

47
Operationandfunction
12.2. Auxiliary functions
The following additional functions can be configured and parameterized via the communications software:
Function Description
DIR.ACTUATOR Assignment of the aeration status of the actuator chamber to the actual position
SPLITRANGE Signal split range; input signal as a % for which the valve runs through the entire
stroke range
X.LIMIT Limit the mechanical stroke range
X.TIME Limit the control speed
X.CONTROL Parameterize the positioner
SAFE POSITION Input the safety position
SIGNAL ERROR Configuration of signal level fault detection
BINARY INPUT Activation of the binary input
OUTPUT Configuration of the outputs (only with auxiliary board for analogue feedback signal
or binary outputs)
Table 23: Auxiliary functions
The operating instructions for the communications software describe in detail the individual functions, as
well as parameterization and configuration.
These instructions can be found on the Internet at www.burkert.com Documentation Type 8696
and are also available on CD which can be ordered by quoting identification number 804625.
english
Type 8696