Burkert Type 8696 - Manual (Page 50)

50
Disassembly
2. Electrical connection
DANGER!
Risk of electric shock!
• Before reaching into the system, switch off the power supply and secure to prevent reactivation!
• Observe applicable accident prevention and safety regulations for electrical equipment!
→
Loosen the circular plug-in connector.
3. Mechanical connection
→
Loosen the fastening screws.
→
Remove the positioner upwards.
Pneumatic connections
Positioner
Actuator
Fastening screws (2x)
Electrical connection
circular plug-in connector
Figure 24: Disassembly the positioner
english
Type 8696