Burkert Type 8696 - Manual (Page 8)

8
Authorizeduse
2. AUTHORIZED USE
Incorrect use of the positioner Type 8696 may be a hazard to people, nearby equipment and the
environment.
• The device is designed to be mounted on pneumatic actuators of process valves for the control of media.
• Do not expose the device to direct sunlight.
• Use according to the permitted data, operating conditions and conditions of use specified in the contract
documents and operating instructions. These are described in the chapter entitled “6. Technical data”.
• The device may be used only in conjunction with third-party devices and components recommended and
authorized by Bürkert.
• In view of the large number of options for use, before installation, it is essential to study and if necessary to
test whether the positioner is suitable for the actual use planned.
• Correct transportation, correct storage and installation and careful use and maintenance are essential for reli-
able and problem-free operation.
• Use the positioner Type 8696 only as intended.
2.1. Restrictions
If exporting the system/device, observe any existing restrictions.
english
Type 8696