Burkert Type 8712 - Manual (Page 28)

28
Installationandcommissioning
Type 8006, 8702
→
Fit the washer [c] and screw the fitting [b] to the device.
C B
→
Insert the line and manually tighten the nut [A].
A
→
Finish tightening the nut with a suitable wrench to ensure the
mounting is sealed.
7.8. electrical installation
danger
risk of injury due to electrical shock
• Shut down and isolate the power supply before carrying out any
work on the system.
• Observe all applicable accident protection and safety
regulations for electrical equipment.
English