Burkert Type 8712 - Manual (Page 7)

7
Generalinformation
Type 8626, 8712
4. GenerAl informATion
4.1. manufacturer's address and
international contacts
To contact the device manufacturer, use the following address:
Bürkert SAS
Rue du Giessen
F-67220 TRIEMBACH-AU VAL
The addresses of the international subsidiaries are available on the
web page at:
www.burkert.com
4.2. Warranty conditions
The condition governing the legal warranty is the conforming use of
the MFM / MFC in observance of the operating conditions specified
in this manual.
4.3. information on the internet
You can find the user manuals and technical data sheets regarding the
MFM / MFC at:
www.burkert.com
5. DescripTion of The
sysTem
5.1. General description
• Mass flow meter MFM types 8006, 8702 are devices designed for
measuring the mass flow-rate of clean, dry gases.
• Mass flow controller MFC types 8626, 8712 are devices designed
for controlling the mass flow-rate of clean, dry gases.
type of device type of sensor
MFM 8006 Inline
8702 MEMS
MFC 8626 Inline
8712 MEMS
5.1.1. General operation of the mass flow
meter (mfm)
The MFM integrates a sensor for measuring the flow-rate. The measured
value for the mass flow-rate is transmitted to a remote device via an
analogue or a digital output (field bus).
English