Burkert Type 8712 - Manual (Page 47)

47
Accessories/Spareparts
Type 8626, 8712
connection
to the
device, with
Din iso 228/1
thread Diameter of
the line material order code
of the olive
connection order code
of the seal
G 1/4 6 mm
Stainless
steel
901 538 901 575
G 1/4 8 mm 901 540 901 575
G 1/4 1/4 " 901 551 901 579
G 1/4 3/8 " 901 553 901 579
G 3/8 8 mm 901 542 901 576
G 3/8 10 mm 901 544 901 576
G 3/8 1/4" 901 555 901 580
G 3/8 3/8" 901 556 901 580
G 1/2 10 mm 901 546 901 577
G 1/2 12 mm 901 548 901 577
G 1/2 1/2" 901 557 901 581
G 1/2 3/4" 901 558 901 581
G 3/4 12 mm 901 549 901 578
G 3/4 3/4" 901 559 901 582
Other accessories for the fluid connection of an
MFM / MFC can be found under Type 1013 in the
Bürkert accessories catalogue.
10.1.3. mass flow communicator
(software)
The "Mass Flow Communicator" software is made for the communication
with the Mass Flow Controllers and Liquid Flow Controllers supplied
by Bürkert.
The software runs on the Windows platform and
communicates with the MFM / MFC via a serial interface
(RS 232).
This software enables:
• information specific to the device to be read,
• the assignment of binary inputs and outputs to be changed,
• the assignment of LEDs to be changed,
• various functions to be activated,
• certain dynamic properties to be modified,
• a user specific calibration to be performed,
• the firmware to be updated,
• the bus address to be set,
• ...
English