Burkert Type 8623 - Manual (Page 22)

20 - 8623-2 Standard
english
6.6 Configuration mode
NOTE
STANDARD
MODE
press key for 5 s
CONFIGURATION
MODE
Menu
.
.
.
END
press key
Fig.: Switching over from standard to configuration mode
Values that are changed within the configuration mode only
become active when this mode is left in the menu item END by
pressing the
key or after switching the device offf and on
again.
In the configuration mode, the settings on the controller can be adapted to the
current application. The control process continues to run in the backround with the
previously active parameters.