Burkert Type 8025 - Manual (Page 61)

61
Sparepartsandaccessories
Type 8025 / 8035
position fig. 70 Designation order code
5+6+7 Set including:
• 2 M20*1.5 / NPT1/2'' reductions (with mounted seals)
• 2 neopren flat seals for the screw plug
• 2 M20*1.5 screw plugs
551782
8+9+14 Set including:
• 1 M20*1.5 cable gland stopper gasket
• 1 2*6 mm multi-way seal for a cable gland
• 1 black EPDM seal for the flow sensor
• 1 mounting instruction sheet
551775
10 + 2 Housing with female connector type 2508, snap ring and nut 425524
11 Housing for 2 M20*1.5 cable glands, snap ring and nut 425526
12 Snap ring 619205
13 Nut 619204
14 Set including:
• 1 FKM green seal
• 1 EPDM black seal
552111
15 Flow sensor (coil) for DN15 to DN100 (1/4" - 4") pipes + replacement instructions 633366
Flow sensor (Hall) for DN15 to DN100 (1/4" - 4") pipes + replacement instructions 418316
16 Flow sensor (coil) for DN ≥ 100 (≥ 5") + replacement instructions 634757
Flow sensor (Hall) for DN ≥ 100 (≥5") + replacement instructions 418324
Set with 8 FLOW foils 553191
11.2. spare parts 8035
1
3
2
10 11
5
7 8
9
6
4
Fig. 71: Exploded view of the spare parts of a 8035
position fig. 71 Designation order code
1 115/230 V AC supply voltage board + replacement instructions 553168
2 Female connector with cable gland (type 2508) 438811
3 Female connector type 2509 with NPT 1/2 '' reduction 162673
4+6+7+9 Set including:
• 2 M20*1.5 cable glands
• 2 neoprene flat seals for cable gland or plug
• 2 M20*1.5 screw plugs
• 2 2*6 mm multi-way seals
449755
English