Burkert Type 8041 - Manual (Page 18)

16
INstallation
Green LED flashes once?
→
Put the cover on the device as
dsecribed in Fig. 17, chap. 8.3.
→
Tighten the 4 screws of the
cover in an alternating pattern.
The device is ready for use.
No, see chap. 10.5
yes
8. insTAllATion
8.1. safety instructions
danger
risk of injury due to high pressure in the installation.
• Stop the circulation of fluid, cut off the pressure and drain the
pipe before loosening the process connections.
risk of injury due to high fluid temperatures.
• Use safety gloves to handle the device.
• Stop the circulation of fluid and drain the pipe before loosening
the process connections.
risk of injury due to the nature of the fluid.
• Respect the prevailing regulations on accident prevention and
safety relating to the use of aggressive fluids.
risk of injury due to electrical voltage.
• Shut down the electrical power source of all the conductors and
isolate it before carrying out work on the system.
• Observe all applicable accident protection and safety regulati-
ons for electrical equipment.
English
Type 8041