Burkert Type 8041 User Manual
Page 33
31
Adjustmentandcommissioning
X
X
......
X
2
2
1
relay
Short press
Short press
Short press
Short press
Current way of
switching*
Current low switching
threshold*
Current high switching
threshold*
Current time delay
before switching*
Hysteresis switching
Window switching
alternately
Release when
desired function is
displayed*
Confirm the choice displayed
Hold > 2 s
Unit increment: LED
flashes up to 9 times
The LEDs then come
on one after the other
(increment in factors
of ten)
Release with the
desired factor of
ten is reached*
Press and hold to
set the units
Unit increment: LED
flashes up to 9 times
Release
with the
desired unit is
reached*
Confirm the dis-
played value
Hold > 2 s
Repeat the sequence if necessary
Hold > 2 s
Hold > 2 s
Hold > 2 s
Hold > 2 s
* If no action for 10 s, the device goes back to Read mode, using the parameters from the previous adjustment.
English
Type 8041