Burkert Type 8041 User Manual
Page 31
29
Adjustmentandcommissioning
1 2 3 4 5 6
4...20 V+ V- PE Pls+Pls-
ON
1
2
3
4
5
6
1 2 3 4 5 6 7 8 910
Green LED:
.....
Flashing once every second: the device is energized.
Flashing once up to 5 times: to know which parameter
the bargraph is indicating
Push-button
Red led:
-
: device in Read mode
-
: device in Parameterizing
mode
-
.....
flashing 1 up to 5
times: error (see 10.5)
Switches 1 to 5: to set the device parameters
(frequency of the main supply, filter of the measure-
ments, measuring range)
Switch 6: unused
10-LED bargraph:
To view and set the device parameters:
- 1 LED ON = 10% of the full scale (or 10 seconds)
- in Read mode
LED flashing "x" times = "x"% of the full scale (or "x"
seconds)
- in Parameterizing mode
LED flashing once = 1% of the full scale (or 1 second)
Fig. 26: Electronic board of the device
English
Type 8041