Fig. 38) – Burkert Type 8041 User Manual
Page 43
41
Adjustmentandcommissioning
State of the relay output
deactivated
actived
Low threshold
High threshold
m/s
Fig. 38: Change of state of the relay output in hysteresis switching
with a relay wired as NC
→
Select the way of switching of the relay (see
40).
Notation convention for the following diagram:
.....
Green LED state
Red LED state
NO
YES
→
1 short press on push button.
See general con-
figuration diagram,
chap. 9.3
Device in Read mode?
.....
1 2 3 4 5 6 7 8 9 10
Bargraph shows current way of switching (Hysteresis,
by default)
→
Press and hold the push button.
After 2 s, device is in Parameterizing mode:
.....
Bargraph alternates between:
Hysteresis switching
Window switching
1 2 3 4 5 6 7 8 910
Step 1
Fig. 39: Choosing the relay switching way, part 1
English
Type 8041