Clear-Com Eclipse-Omega - Manual (Page 41)

Clear-Com
Eclipse Omega Instruction Manual 2 - 2 1
• An E-QUE card provides eight RJ-45 ports for connection to wireless
equipment and three RJ-45 ports for DECT sync and LAN
connections.
• An IVC-32 card provides a RJ-45 port for connection to an IP
network. No other ports are used.
• An LMC-64 card provides a RJ-45 port for connection to an IP
network. No other ports are used.
• A blank panel covers an unused slot in the matrix.
CONNECTING THE CPU CARD
The rear-connector panel associated with the CPU card holds seven
connectors, as illustrated in Figure 2-6. The following sections
describe each connector. The Installation Chapter of this manual gives
pin assignments for each connector.
Note: A matrix only requires one rear-panel CPU card, because
whichever of the two front-installed CPU cards is acting as
master will work in conjunction with this card. All other
front cards, however, require their own rear-connector
panel.