Clear-Com Eclipse-Omega - Manual (Page 81)

Clear-Com
Eclipse Omega Instruction Manual 6 - 1
ECLIPSE LMC-64
INTERFACE
LEVEL METER CARD DESCRIPTION
The Eclipse Level Meter Card (LMC-64) interface allows the Eclipse
matrix to provide audio level metering for Production Maestro Pro over
a network. The LMC-64 interfaces must be fitted in the rightmost
available slots on the Omega (furthest from the config cards) and up to
four LMC-64 interfaces can be fitted on an Eclipse Omega matrix.
Each LMC-64 interface can meter up to 64 Conferences (Virtual Party
Lines) and 4-Wire ports; using all four LMC-64 interfaces that can be
fitted would allow up to 256 audio levels to be metered.
Each LMC-64 interface consists of a front card with a reset button and
various status indicators, and a rear card with eleven RJ45 ports giving
eight E1/T1 ports (not used), DECT sync in and out (not used) and a
LAN port used for the IP connection.
Each LMC-64 front card has status LEDs for power, port activity and
LAN status. The port activity LEDs are not active on the LMC-64 front
card as the E1/T1 ports are not used.
Note: It is necessary to have an ethernet cable connected to the
LMC-64 interface LAN port for the card to function correctly.
Note: For power reasons, up to a maximum of 4 cards total of any
type LMC-64, IVC-32 and E-Que can be fitted in 4 slots of an
Eclipse Median or Omega.
6