CNB ID2810PVF - Manual (Page 22)

XNET Network Dome Camera User’s Guide
address set by “Recv E-Mail Address”.
Recv E-Mail
Address
Enter E-mail address to receive information sent from your
network camera. This is same as E-mail field in IP-installer.
Return E-Mail
Address
Fill in this field with correct e-mail address to identify the
mail sent from the network camera
If you are using web mail services having no SMTP server,
check the radio button at the left of “Using Built-in SMTP
Server” and enter valid e-mail address to avoid spam
filtering on the receiving e-mail server.
Using Built-in
SMTP Server
Using
External
SMTP Server
If you are using external mail server, fill in the fields with
proper parameters.
Setup IP address, Username, Password and Directory of FTP
server to send data in case of alarm. Default FTP port
number is 21.
You can register the network camera to the Management
Server (DDNS Server) for name service to your network
camera.
FTP Server
Setup
Management
Server
Log on to
server
Check this box to enable log on to the management server.
By log on to the management server your network camera
can use domain name instead of numeric IP address. This
feature is particularly useful when your network camera is
using dynamic IP address. Input valid management server
(DDNS Server) name for the service.
You must have an account on the management server
(http://mgmt.ipdvrfree.com/) and register your IP video
devices under your account to use this feature.
Domain name of your network camera can be assigned when
you register your network camera to the management server
under your account.
Save the set-up parameters when the set-up parameters are
done.
Save
22 of 44