CNB ID2810PVF User Manual
Page 43
XNET Network Dome Camera User’s Guide
z Control Panel of Web Viewer
Enable bidirectional audio. When bidirectional
audio is enabled, voice from your PC is delivered
to XNET/XNET-Wireless.
Capture and store the still image on your desk
top screen.
Connect to XNET/XNET-Wireless in administrative
mode of XNET/XNET-Wireless.
Rotate the screen by 180 degree.
Connect to XNET/XNET-Wireless.
Stop the connection.
Contrast, Brightness, and Volume adjustment..
Check the box to mute the audio.
Adjust the size of the screen. Normal (x1), Twice
(x2), Half (1/2), Full Screen (full)
On/off the relay by pressing the button
Shows the status of the sensor. Blue color means
that the sensor is in normal state, while red color
indicates alarm situation.
Number on the button indicates the number of
sensor.
Move the center of the camera in
up/down/left/right directions.
Not applicable for XNET/XNET-Wireless.
43 of 44